Model details: MFG-5 Microforge-Grinding Center, MDI Micro Data instruments , Inc., USA
Description: read more »
Nanoparticles
Microforge-Grinding Center
Micromanipulator
Model details: Three-axis water hydraulic micromanipulator, MHW-3, Narishige Co.Ltd. Japan
Description:
This instrument facilitates precise maneuvering of samples under microscope.
Applications:
For patch clamping experiments to study of single or multiple ion channels in cells.
Attachments available:
B-9 Ball joint. This highly stable ball joint was developed for patch clamping. Allows free rotation and approach from many different angles. read more »
Additional Information is available below for LDAP logged in users
CCD Camera
Description:
CCD camera converts optical brightness into electrical amplitude signals using charge coupled device (CCD) image sensor. The CCD image sensor includes an image sensing section, which performs photoelectric conversion, and a storage section, which is arranged separate from the image sensing section and temporarily stores charges acquired by the photoelectric conversion. The charge collected and stored in an array of semiconductors represents a picture element or pixel of an image.
Components:
1) IEEE 1394 FireWire Digital interface read more »
Additional Information is available below for LDAP logged in users
Particle Size Analyser
DSC06111.JPGModel : Malvern : ZEN 1600 (Red)
•Method: Dynamic Light Scattering, scattering angle (detection): 173° (back scattering, NIBS®-Technology)
• Equipment: He-Ne-laser 4 mW, 632.8 nm, movable lens, attenuator Size range : 0.6nm to 6 micron Molecular weight : 1000 to 2 x 107 Da read more »
Additional Information is available below for LDAP logged in users
Inverted Microscope, TE 2000 – U, Nikon
Model details:
Model TE 2000 – U, Nikon-Inverted microscope
Description:
Microscope with its light source and condenser on the top, above the stage pointing down, while the objectives and turret are below the stage pointing up. The stage on an inverted microscope is usually fixed, and focus is adjusted by moving the objective lens along a vertical axis to bring it closer to or further from the specimen. The focus mechanism typically has a dual concentric knob for coarse and fine adjustment.
Useful for: read more »
Additional Information is available below for LDAP logged in users
Millipore Water purification system
Model details: Elix 3 UV Water Purification System (120 V / 60 Hz), Millipore
Principle:
Tap water initially passes through a Proguard pretreatment pack; removes particles and free chlorine from the water. The water is then pressurized with a pump and then is purified by reverse osmosis (RO). The RO product water then passes through an electrodeionization (EDI) module; reduces levels of organic and mineral contaminants. The removal of organics, ions and bacteria has been monitored using, respectively, a TOC analyzer and ion chromatography. read more »
Additional Information is available below for LDAP logged in users
Confocal Laser Scanning Microscopy
Model details: Model LSM 510, GEISS with LSM Software ZEN 2007; LSM 5 EXCITER laser scanning microscope; Point probing scanner
Purpose: To re-construct three-dimensional structural information, giving details about internal structures and 3D topography of the specimen read more »
Additional Information is available below for LDAP logged in users
Condensation Particle Counter, Model 3775, TSI
Condensation particle counter (CPC) :Model 3775, TSI
“counts nanoparticles down to 4nm”
Purpose: To detects and count particles down to 4 nm at concentrations up to 107 particles/cm3
Principle: CPC is an optical particle counter. However, the particles are first enlarged by a condensing vapor to form easily detectable droplets. It uses a laser-diode light source and diode photodetector to collect scattered light from particles traversing through the laser.
Features and benefits: read more »
Additional Information is available below for LDAP logged in users
Syringe pump with static mixing unit
Syringe Pump _mixing unit.JPGThe capacity of this pump is 500ml and it can be operated in a temperature range of 5 - 40° C. Temperature control jacket, High-temperature pressure transducers and High-precision pressure transducers are present. Hence, there is a flow and pressure control. The flow range can be between 0. 001 – 204 ml/min. The 500D is ideal for a wide range of chemical feed applications and metering of liquefied gases. RS-232 serial interface enables computer control or monitoring of operating parameters.
Web links:
http://www.isco.com/products/products3.asp?PL=1051020 read more »
Additional Information is available below for LDAP logged in users
Argon Ion Laser System
Argon Ion Laser.JPGModel: 177G Laser system, Spectra-Physics read more »